With Evolution Fast Syncro, Virag expands the Evolution Fast collection with a range of decorations that boast, in addition to the amazing features of printing, two other additional peculiarities that can give even greater prominence to the floor and the environment. The perfect combination between the relief of the finish and reproduction of the wood effect is such that the naturalness of the knots is not only rendered visually, but also on a tactile level. The large size of the planks also allows to avoid the grid effect by returning an increased perception of space
Composition
Vinyl flooring composed of:
- 0,55 mm Transparent PVC wear layer (PU)
- 0,10 mm Pure PVC decor layer printed using innovative techniques
- 4,35 mm SPC layer
- 1,00 mm Polyethylene specialist underlay
The components are heat-assembled on a non-continuous press.
Installation instructions
The flooring must be laid on a flat, hard, dry (without humidity traces), clean, smooth and dust-free subfloor.
Flat subfloor = Flatness must be < to 2 mm below the positioning of the 2 metres rod. The subfloor must not have irregularities > than 1 mm / 20 cm. In case of gluing on a underfloor heating, turn off the heating 24 hours before the laying operation. If the surface has irregularities more than 1 mm deep, the application of a levelling product should be considered.
PLEASE NOTE: the fire classification Bfl-s1 is guaranteed when the flooring is laid on non-combustible substrate.
• Precautions for use.
Apply felt pads below the legs of furniture or below heavy objects. Protect the planks from direct heat sources such as stoves and chimneys. Dyed rubber-based and castors (castor chairs, tables etc.) may indelible stain the flooring.
• Floor cleaning.
Vacuum cleaner or wet cloth. Use only Detergent Evo of Virag. Difficult stains: dilute bleach, alcohol or lemon juice. Ink, tomato, mustard, blood, beet, mercurochrome stains: leave diluted bleach on for some minutes without scrubbing. Rinse abundantly. Rust: clean with a rust preserver for fabrics and rinse abundantly. Grease, ink and felt-tip pen: scrub slightly with a piece of cloth soaked in alcohol. Rinse abundantly.
• Precautions for maintenance.
Absolutely avoid using acetone and chlorinated solvents (e.g. trichloroethylene).
Vieni in showroom per scoprire il fascino dei nostri prodotti
