Muravyl

Muravyl Extra wall covering is the ideal solution that combines protection against mold and bacteria and practicality, giving an elegant and refined aesthetic appearance. The rolls have a washable surface for easy maintenance.

BASIC INFORMATION:

THICKNESS: 0,92 / 1,30 / 1,50 mm

SIZE: Roll

INSTALLATION: Glued

MATERIAL: PVC

MATERIAL COMPOSITION – MURAVYL EXTRA
Muravyl Extra wall covering is made of heterogeneous pvc in rolls with high mechanical properties of 0,92mm of total tickness. the vinyl coating is reinforced with glass fiber. The 0.12 mm pure PVC surface ensures easy cleaning and prevents the formation of mold and bacteria.

INSTALLATION – MURAVYL EXTRA
Installation should be done on smooth, dry, clean and solid walls. Rolls must be firmly bonded to prevent movement or deformation. Installation surfaces should have a moisture content of around 8%, equivalent to a relative humidity of 40% to 20°C. During laying, the ambient temperature must be a minimum of +18°C, and this temperature must be maintained for at least two days after completion of the work. Sheets should be laid inverted to each other. The vertical deflection of the wall should not exceed 5mm over a height of 2.5m. Always apply a suitable primer to the substrate before starting installation.

MAINTENANCE – MURAVYL EXTRA
For cleaning Muravyl Extra wall coverings, dry cleaning is recommended in preference to wet cleaning. To make cleaning and maintenance work more effective, daily cleaning is recommended, minimizing environmental impact by using less chemicals and water. For cleaning, simply wipe with a sponge soaked simply in clean water. A soft brush can also be used. Avoid the use of abrasive cloths.

MATERIAL COMPOSITION – MURAVYL PLUS
Muravyl Plus wall covering is made of PVC with high mechanical properties. It is impact and scratch resistant due to its XP PUR glass fiber reinforcement. The surface is protected by an advanced pure PVC treatment to ensure ease of cleaning and prevent mold and bacteria growth.

INSTALLATION – MURAVYL PLUS
Installation should be done on smooth, dry, clean and solid walls. Rolls must be firmly bonded to prevent movement or deformation. Installation surfaces should have a moisture content of around 8%, equivalent to a relative humidity of 40% to 20°C. During laying, the ambient temperature must be a minimum of +18°C, and this temperature must be maintained for at least two days after completion of the work. Sheets should be laid inverted to each other. The vertical deflection of the wall should not exceed 5mm over a height of 2.5m. Always apply a suitable primer to the substrate before starting installation.

MAINTENANCE – MURAVYL PLUS
Dry cleaning versus wet cleaning is recommended for cleaning Muravyl Plus wall coverings. To make cleaning and maintenance work more effective, daily cleaning is recommended, minimizing environmental impact by using less chemicals and water. For cleaning, simply wipe with a sponge soaked simply in clean water. A soft brush can also be used. Avoid the use of abrasive cloths.

MATERIAL COMPOSITION – MURAVYL SOLID
Muravyl Solid homogeneous PVC wall covering has high mechanical properties and a thickness of 1.3 mm to ensure ease of cleaning and avoid the formation of mold and bacteria. The material composition of the cladding ensures hygiene in all those domestic, hospital or hospitality environments that require salubriousness.

INSTALLATION – MURAVYL SOLID
Installation should be done on smooth, dry, clean and solid walls. Rolls must be firmly bonded to prevent movement or deformation. Installation surfaces should have a moisture content of around 8%, equivalent to a relative humidity of 40% to 20°C. During laying, the ambient temperature must be a minimum of +18°C, and this temperature must be maintained for at least two days after completion of the work. Sheets should be laid inverted to each other. The vertical deflection of the wall should not exceed 5mm over a height of 2.5m. Always apply a suitable primer to the substrate before starting installation.

MAINTENANCE – MURAVYL SOLID
When cleaning Muravyl Solid wall coverings, dry cleaning is preferred over wet cleaning. To make cleaning and maintenance work more effective, daily cleaning is recommended, minimizing environmental impact by using less chemicals and water. To clean coatings, simply wipe with a sponge soaked in clean water. A soft brush can also be used. Avoid the use of abrasive cloths.