Durasol
Ideal for all settings where high resistance to traffic is required.
Practical, easy to clean and sanitize; no special maintenance necessary.
Available in h200 sheets in wood, multicoloured stippling and metallic effects. Suitable for installation in schools, multipurpose function rooms and cinemas.































Usage classes and classifications
High performance technical vinyl flooring consisting of a pure, transparent PVC layer 0.70 mm thick and a compact layer of PVC foam. The whole is stabilized and reinforced with the insertion of a fibreglass sheet.

The laying surface must be flat, smooth, dry, firm, free of grease and cracks and maintain these characteristics over time. During installation, ambient temperature must be at least + 15°C and this temperature must be maintained for at least two days after work completion. Installation is carried out with easy-coverage glue using suitable adhesives according to the manufacturers' instructions. Maximum permissible residual humidity for a concrete substrate is = 2.5%. In the case of laying on subfloors that are not basements or lacking a ventilated crawl space, waterproofing is necessary before casting the screed. Sheets must be laid uninverted and in the direction of the light source. Sheets are always to be either heat welded through bead filler or cold welded with THF-based liquid.

Important: remove any traces of adhesive with detergent. Floor can be walked on immediately after laying. Carry out daily maintenance with a damp cloth soaked in a commercially available cleaning solution. Warning: do not clean with solvents such as trichloroethylene, acetone, etc. Prolonged resting of tyres may cause indelible dark marring to form on flooring.
